600W 12V80AH Mini Fast Charging Support Portable Power Station Ups Generator Portable Emergency Power Supply

Outdoor electricity, wonderful and convenient!!

Light, portable, beautiful and easy to use large capacity lithium electric pure sine wave UPS standby power supply products. Adopts advanced inline lithium battery manufacturing process, the output energy is strong, provides AC output, DC output two different voltage mode output, in order to adapt to the needs of different electronic products. This product can be used as both on-line UPS power supply and outdoor emergency backup power supply. To meet the power supply needs of most mobile electronic products.

This product has a built-in high-capacity long-life lithium battery with a total capacity of 12V 26-90AH / 288-990WH to provide a steady supply of power. After a power failure, it can supply power for ordinary home office desktop computers for 5~20 hours without shutdown. At the same time as indoor and outdoor standby emergency power supply, also has a wide range of uses. 220V/12V/5V AC/DC output, suitable for a variety of different equipment, mobile phone, tablet, laptop, small printer, all kinds of lamps, small fish tank heater, photographic equipment, electric balance unicycle charging, medical equipment and so on. Abandon the shortcomings of the traditional UPS power supply, it is a necessary good product for home travel, outdoor work, camping picnic, mountaineering and exploration.

Function introduction and instruction

When using the DC output function, please turn on the corresponding DC switch and the DC output indicator light is on. At this time, the DC 12V and 5V output can be used. When not in use, please turn off the switch to avoid power consumption. LCD display display power supply, 0~100%. When the power is low, please charge the product in time for further use. When using the LED lamp, please turn on the corresponding switch.

As shown in the figure, please insert the AC input power cord into the AC input interface. Then connect the load power cord to the AC base of the product itself, and open the AC output switch to operate normally. When there is no power failure, the AC mains power supply for the load, at the same time, the product is also charged, when the power failure suddenly, it will automatically switch to the product internal battery power supply for the load.

Please note: when using the load, the load running power should not exceed the maximum output power of the machine itself. For example: the maximum output power of the machine itself is 600W, if the running power of the load is more than 600W, the power supply will enter the protected state and cannot be output. Remove excess load, restart the power supply can be used normally. When using the super power, it will cause the machine's own fuse to blow out. If you replace an 8A one, it can be used normally.

Please turn off the switches when you take them out for outdoor use, and turn them on when you need to use them, otherwise they will automatically consume the battery power.

Solar charging instructions: solar interface as shown in the figure, solar panel size is 18V, 50W~120W is appropriate. When accessing the solar panel, it should be noted that the positive and negative poles cannot be connected inversely. They should correspond to the positive and negative poles of the interface (positive inside and negative outside), otherwise it cannot be charged.

Electrical parameters

Work functional picture

In the case of normal power supply, power supply will be provided to the equipment and charge the product at the same time.

In case of sudden power failure, the lithium battery inside the product will be automatically switched instantly to supply power to the equipment.

In the face of sudden power failure, computers can be realized not to shut down to continue to work!

Standby time

Matters needing attention

1. This product contains lithium batteries, please keep away from the fire source, if not used, please carry out special treatment, do not throw away

2. Do not use this product in wet environment or water. Pay attention to moisture protection and try to use it in a ventilated and dry ring

The land use

3. Please handle with care when using the product. Do not drop, knock or tear it apart violently.

4. If any abnormal phenomena such as smoke or fire occur during the use of the machine, please stop using it immediately and take relevant fire-fighting measures to avoid explosion.

5. When using this product, please turn on the machine first, turn on the corresponding switch, the LED indicator lights up to confirm the output, and then use it.

6. Please refer to the instruction manual when using the product for the first time.

7. When the product is not in use, please take it out and charge it once every three months or so to ensure the battery life.

Q1: Wonder if you accept small orders?

A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.

Q2: Can you send products  to my country? 

A2: Sure, we can. If you do not have your own ship forwarder, we can help you. 

Q3: Can you do OEM for me?

A3: We accept all OEM orders,just contact us and give me your design.we will offer you a reasonable price and make samples for you ASAP.

Q4: What's your payment terms ?

A4: By T/T,LC AT SIGHT,30% deposit in advance, balance 70%  before shipment.   

Q5: How long is your production lead time?

A5:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.

Q6: When can I get the quotation ?

A6: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.